Welcome to nolitto3d! Creators of the Clixbeetle™, the best Tactile Feedback Mods for the Thrustmaster TH8A/RS and Logitech Driving Force Shifters!
Upgrade and transform your Thrustmaster and Logitech Shifters with these top mods!
Enjoy the immersion!
Awesome, great feeling and large range of force adjustment.
Modification for Thrustmaster TH8A. You need a stable support, not a desk top ;)
An absolute must have for any TH8A shifter. Completely transforms the tactile feedback when changing or shifting gears. I very lightly grease ours with silicon grease using a toothpick every 6months or so, and it has been faultless and very reliable in over a year and more now. Don’t waste your money on alternatives like I did before this one. Easily the best mod there is by far.
Fitted this as an upgrade from the original short throw knob I had previously fitted. Feels even better than the previous version, and adds a nice bit of weight to the feel of the shifts. Paired with the clixbeetle mod, it transforms the shifter completely. Must have upgrade.
Best company and service I have had and dealt with in quite a while.
Fitted this short throw knob and it works very well.
Makes a good addition to the shifter.
This is a game changer. Feel so much better and real than the original set up.
Not to mention the excellent service, very helpful and super fast shipping
Works really well. Makes shifting more realistic!
Love the product it’s very easy to install and now my shifter feels like the real thing
This little mod makes the shifter so much better to shift with.
After downloading the pdf instructions and following the steps it was an easy mod to install.
Nice clicking sound and firmness while changing gears
Okay so I have a dual racing rig setup, 2 screens, 2 rigs, 2 PCs, 2 pedal sets, 2 steering wheels, 2 Handbrakes, 2 shifters, 2 of EVERYTHING (side-by-side)... Which ALSO means I had to obviously buy 2 of each item from this store (to get the BEST of the BEST)...
The products arrived VERY quickly and secured PROPERLY with lots of bubble wrap around EVERYTHING!
Now, heres the kicker...
So STUPID me, I installed one of the Clixbeetle-GT V2 mods correctly on my TH8A shifter, but the SECOND one I messed up.... PLEASE MAKE SURE when installing that you THOROUGHLY clean off the shifter stick before attaching the 2 clips. I did it 100% proper on the 1st TH8A, but wasnt so careful on the second TH8A...
So anywayssss, I messed one up. I emailed Nolitto3D and expressed my situation (that I needed two more clips, because I didnt do it properly) and they IMMEDIATELY responded and said "NO PROBLEM! We will send you a few more clips"!
See THATS MY POINT, these guys CARE for their customers. Didnt even question anything. Didnt even charge me delivery fee for the new clips. NOT only that, but they ALSO threw in a special bonus also.
Now if THAT doesnt scream QUALITY/CUSTOMER LOVING CARE....
SERIOUSLY! You guys went ABOVE and BEYOND for me! I love you guys!
Thanks again for EVERYTHING!
Cheers and God bless ALL of you!
Completely changed my shifter. After the my initial test I jumped in my 981 Cayman to see how similar the shifting action was. Porsche is known for having the best shifters and this thing is super close! Make sure you buy the correct grease (silicone or lithium) to avoid delays when it arrives. It took about three and a half weeks to reach me in the US from the land down under. Thank!!
The installation was very easy, the feel is so good and there is so many adjustment that it can feel however anybody wants.
Can’t stress how much of an improvement this really is. Ordered with their shift plate, knob and shift blockers. Gives such a satisfying, notchy feel. I haven’t used the fanatec shifter, but I’d be surprised if it felt as great as this!
Love the weight and length of this knob. You really should pair it with the Clixbeetle mod to balance the weight of this knob.
Very well built. Feels solid. youll need to supply your own grease.
This greatly improves the shifting feel of the Thrustmaster TH8A. The stock shifter is loose and pretty sloppy, even when tightening the stock screw. It won't make the shifter as solid as a Fanatec, but it's well worth the install. Only other thing I'd recommend is making the throw shorter and this would be a pretty solid combination.
Clixbeetle-GT YouTube Review by Barry Rowland - Sim Racing Garage
Clixbeetle-Pro YouTube Review by Barry Rowland - Sim Racing Garage
A spring is not "just a spring"
We learnt a lot about spring design while finding the right springs for the Clixbeetle-Pro/GT/GTV2.
The springs in the Clixbeetle have been specifically designed for optimal tension to get that beautiful tactile feedback and resistance when installed in your TH8A shifter.
A big shout out to Jubilee Springs!
Great Aussie company who helped us design the springs and who also manufacture the springs for the Clixbeetle-Pro/GT/GTV2
Laser-Cut Stainless-Steel Plates
The Stainless-Steel plates in the Clixbeetle-GT/GT V2 are Laser-Cut for precision.
These plates add extra durability to the part and also allows the spring tension to be adjustable.
The Clixbeetle-GT/GTV2 is a perfect example of how it is viable to combine metal with a 3d printed part to make mechanical parts.
Install one in your TH8A shifter for greater resistance and Tactile Feedback when using the H-pattern shifter mode.
Adjust the spring tension to your preference (only in GT/GT V2)
The Clixbeetle-GT/GT V2 ball bearing spring pressure has already been calibrated for optimal
tactile feedback. You may however fine tune the pressure to your preference by following the Clixbeetle-GT Spring Pressure Adjustment guide. Be careful not to lock the springs by overtightening the grub screws though (please follow the guide to prevent damage).